Community solar and virtual net metering: how an off-site solar share becomes a bill credit
Virtual net metering credits your electric bill for solar power produced somewhere other than behind your own meter: on a shared array across town, on the roof of your apartment building, or on another account you hold. Community solar is the best-known version, and the number that matters is the credit rate the law sets for each allocated kWh, which is not always the retail price. In Washington, D.C., where the net metering statute also governs community renewable energy facilities,1 that rate is written into the code.
Published November 16, 2026. Rules checked November 16, 2026.
What virtual net metering means
Ordinary net metering works at one meter. Panels on a house send surplus power through the home's own meter, and the utility sets those exports against the home's purchases. Virtual net metering breaks that link. The panels sit at one meter, usually a separate production meter, and their output is credited to accounts somewhere else. The word "virtual" describes the bookkeeping: no electricity travels from the array to the subscriber's house; the utility moves a number from one account to another.
The arrangement goes by many names. Statutes say "community renewable energy facility" (District of Columbia) or "shared financial interest" in a resource used for "net energy billing" (Maine); PG&E's tariff speaks of "load aggregation"; programs and their sellers mostly say "community solar". The U.S. Department of Energy defines community solar as any solar project or purchasing program within a geographic area whose benefits flow to multiple customers, and describes subscribers who pay for, or sometimes own, a share of an array and receive a bill credit for the electricity their share generates.
Three questions decide what a subscription is worth on a bill, and the rest of this guide takes them in turn: how production is measured and divided, what rate each allocated kWh earns, and what limits the program puts on who can join and for how long.
How the credit is calculated: the District of Columbia's statute, step by step
Most programs leave the arithmetic to commission rules and utility tariffs. The District of Columbia wrote it into its net metering statute, §34-1518, which makes it a readable example of the mechanics.1
- Production is metered at the project. A revenue-quality production meter, installed and paid for by the facility's owner and read by the electric company, measures how many kWh the facility generates each month.
- Production is divided by share. Each subscriber's credit is based on their percentage interest in the facility's total production. A subscription, in the District's definitions, is "a percentage interest" in a facility's electrical production.
- kWh become dollars at a set rate. Each billing month, the kWh allocated to a subscriber are multiplied by that subscriber's "CREF credit rate".
- The credit is applied to the bill. If the credit exceeds what the subscriber owes, the remainder carries over from month to month until it is used; if it is smaller, the subscriber is billed for the difference.
- Competitive supply does not change the credit. A subscriber who buys electricity from a supplier other than standard offer service is billed by that supplier for every kWh used and receives the credit from the standard offer administrator at the same CREF credit rate.
The rate in step 3 is set in the District's definitions section, §34-1501. For residential subscribers it is the full retail rate, including generation, transmission and distribution charges, of the standard offer service General Service Low Voltage Non-Demand class, a commercial class, rather than the subscriber's own residential rate. Commercial subscribers receive the standard offer service rate for that class.
The same statute settles two points that a subscription contract would otherwise have to. The renewable energy credits from the facility belong to the subscriber organization or third-party owner unless they were sold in a separate transaction, so a subscriber does not own the project's environmental attributes. And prices paid for subscriptions, along with other contractual matters, are outside the Public Service Commission's jurisdiction. The facility itself must follow the District's small generator interconnection procedures in Chapter 40 of Title 15 of the municipal regulations.1
The credit rate: four jurisdictions, four answers
The single most useful thing to find in a program's rules is the value of one allocated kWh. Rooftop net metering usually answers "the retail price of the energy it replaces". Shared and virtual programs often answer differently, and the answer can depend on the size of the project rather than on the subscriber.
| Jurisdiction | What a credited kWh is measured against | Source |
|---|---|---|
| District of Columbia | Residential subscribers: full retail rate of a commercial standard offer class; commercial subscribers: that class's standard offer service rate | D.C. Code §34-1501, §34-15181 |
| Massachusetts | Standard credit: the basic service, distribution, transmission and transition charges of the host customer's rate class; larger non-exempt solar: a reduced Market Net Metering Credit | 220 CMR 18.04; National Grid tariff23 |
| Maine | kWh credits netted against kWh delivered over the billing period | 35-A M.R.S. §3209-A4 |
| California (PG&E) | Aggregated accounts on the Net Billing Tariff: imports billed on E-ELEC, exports credited at hourly avoided-cost values | Schedule NBT5 |
Massachusetts shows how much the size of a project matters. The standard Net Metering Credit is 100% of the excess kWh multiplied by the sum of the basic service, distribution, transmission and transition charges "applicable to the rate class under which the Host Customer takes service". The value is priced from the host customer's rate class. Residential systems of 25 kilowatts AC or less are "Nameplate Cap Exempt Facilities" and get the standard credit. Larger solar facilities outside the exemption receive a Net Metering Credit based on 60% of net excess generation, multiplied by the same four per-kWh charges.3
California's investor-owned utilities show the other end. PG&E's Net Billing Tariff names "Load Aggregation Generating/Aggregated Accounts" among the residential customers who must take service on the E-ELEC time-of-use rate, and under that tariff imports and exports are recorded on separate meter channels and not netted. Exports earn hourly values from the CPUC's Avoided Cost Calculator, locked for nine years for applications filed from April 15, 2023 through December 31, 2027.5
New York adds a cost difference rather than a credit difference. Residential and small commercial customers who interconnect solar at their own site on or after January 1, 2022 pay a monthly Customer Benefit Contribution based on the system's DC size; the charge does not apply to community solar.6 The state's VDER compensation does not pay out credits at any time, and carryover runs to the end of a 20-year term for Phase One NEM and a 25-year term for Phase One Value Stack.7
Maine: where net-metering customers far outnumber home systems
Maine's figures show how far a count of customers can drift from a count of home systems where shared projects are allowed. Utilities reported 90,780 net-metering customers at the end of 2025, but only 19,516 residential installations; net-metered capacity was 1,886 MW, of which residential systems accounted for 160 MW8. In no other state is the gap between the two counts as large, in absolute or relative terms.
The law that allows shared participation is 35-A M.R.S. §3209-A. The commission must let a customer take part in net energy billing if the customer has a financial interest in a distributed generation resource, including ownership, a lease or a power purchase agreement. Any number of customers of an investor-owned utility with distinct billing accounts may share that interest, except that for a resource in the area administered by the independent system administrator for northern Maine the number is limited to 10 accounts or meters unless the commission finds the utility's billing system can handle more. A resource used this way must be smaller than 5 megawatts, with an exception for municipalities. The credits are kWh: net energy is the kWh the utility delivers minus the kWh the customer delivers over the billing period, counting unused credits carried from earlier periods.4
The program is now closing to new grid-side projects. Under subsection 10 of the same statute, added in 2025, after 2025 the commission may not allow a utility to enter into a net energy billing agreement with a resource interconnected, or planned to be interconnected, on the utility side of a customer's meter. Existing agreements are not extended: an amendment, revision or reissuance made after June 1, 2025 may not set a delivery period end date later than the one in the original agreement. A second 2025 law, PL 2025, c. 575, requires project sponsors to comply with state consumer-protection law.4 Maine's statute calls a sponsor an entity that solicits customers to join a net energy billing arrangement based on a shared financial interest.
Caps, size limits and eligibility
Where virtual and shared arrangements sit inside a state's net metering law, that law's caps, size limits and eligibility rules reach them too.
- Massachusetts. Net metering facilities other than those of a municipality or other governmental entity may not exceed 7% of the distribution company's highest historical peak load, and public facilities 8%.92 Small residential systems are exempt from those caps.3
- Maine. Resources of 1 to 2 MW may be used for net energy billing only if they reached commercial operation by the date in their agreement, on or before December 31, 2024.4
- District of Columbia. Eligibility comes from the definitions: a subscriber must be a retail customer of the electric company and must name an individual billing meter in the District, and the facility must be located in the District (§34-1501).1
State rules of this kind bind investor-owned utilities. Customers of municipal utilities and electric co-operatives should look at their own utility's tariff, because those utilities often run their own shared-solar programs under their own terms.
Federal tax credits: the subscriber, the owner and the landlord
A household buying a share of an array in 2026 has no §25D credit to claim. The credit stops with expenditures made by December 31, 2025, and a subscription is not an installation the subscriber completes; for anyone who did install, the date that counts is completion, not payment. Credit earned for an installation completed in 2025 that exceeds the year's tax can be carried to the next tax year.10
A subscriber who pays a monthly fee for a share of output does not own the panels, and any federal credit for the project belongs to its owner. For a business owner the relevant credit is §48E. For solar whose construction begins after July 4, 2026, no §48E credit is allowed if the facility is placed in service after December 31, 2027,11 and facilities whose construction begins after December 31, 2025 lose the credit if they include material assistance from a prohibited foreign entity.12 Whether any of the owner's credit reaches a subscriber depends on the subscription contract; the statute gives the subscriber no claim to it.
Shared solar on rental housing raises a third case. The IRS says a landlord who does not live in the home cannot claim the residential credit,13 so a building owner who does not live in the building and allocates a system's output to tenants' accounts could not claim §25D for it even before the credit ended.
| Rule | What it means | Operative text |
|---|---|---|
| Termination of the residential credit | No credit for expenditures made after December 31, 2025.10 | The credit allowed under this section shall not apply with respect to any expenditures made after December 31, 2025. |
| When an expenditure is made | An expenditure is made when the original installation is completed (new construction: when original use of the home begins).10 | an expenditure with respect to an item shall be treated as made when the original installation of the item is completed |
| Landlords | A landlord who does not live in the home cannot claim the credit.13 | landlord or other property owner who doesn |
| Solar placed-in-service cutoff | No §48E credit for solar property placed in service after December 31, 2027 (unless the effective-date rule exempts it).12 | This section shall not apply to any qualified property placed in service by the taxpayer after December 31, 2027, which is part of an applicable facility. |
This is not tax advice. The federal solar tax credit page covers carryforwards and third-party ownership in detail.
What to check before subscribing
The statutes above point to the questions that decide what a subscription delivers. In the District of Columbia the statute puts subscription prices outside the Commission's jurisdiction,1 so the price is whatever the contract says, while the bill credit is whatever the law says. The two numbers come from different documents, and a subscriber needs both.
- The credit rate. Find the rule or tariff that values an allocated kWh, as in the table above, and whether it is a retail, reduced or avoided-cost value.
- What the credit can offset. Under PG&E's Net Billing Tariff, for example, export credits apply to volumetric import charges but not to non-bypassable charges.5
- Leftover credit. The District's statute carries unused credit forward month to month; Massachusetts tariffs carry remaining Net Metering Credit balances forward from billing period to billing period.3
- Term and exit. Maine's 2025 amendment fixes the end date of existing agreements,4 and its statute lets a customer rescind a shared arrangement by asking, orally or in writing, within 5 days of receiving the first bill or invoice they must pay in full. Ask how a contract ends if you move out of the utility's territory.
- Renewable energy credits. If the project owner keeps them, as the District's default rule provides, the subscriber is buying bill credits, not the renewable energy credits.
For the rooftop alternative, our guide to net metering explains how credits work at a single meter, and each state page names the rule, its effective date and the utilities it covers.
Community solar questions
What is virtual net metering?
An arrangement in which the output of a solar system is credited to one or more electric accounts that are not the meter the system is connected to. The utility reads the system's production and assigns it, in kWh or dollars, to the participating accounts. Maine's statute, for example, lets multiple customers of an investor-owned utility with separate billing accounts share a financial interest in one generating resource and take part in net energy billing.4
How do community solar credits show up on a bill?
As a credit line set against what you owe the utility. In the District of Columbia each subscriber's credit is the kWh allocated to them multiplied by their credit rate; if the credit is larger than the bill, the remainder carries to the next month, and if it is smaller, the subscriber pays the difference.1
Is community solar the same as net metering?
It is related but not the same. Net metering subtracts the exports of panels at your own home from what you buy. Community solar credits you for a share of a separate project's production, and the law that sets the value of that share can differ from the rule for rooftop panels. In Massachusetts, larger solar facilities that are not exempt from the caps receive Market Net Metering Credits based on 60% of net excess generation rather than the standard credit.3
Can renters join community solar?
Usually yes, if a program is open in their utility's territory, because a subscription needs only an electric account, not a roof. The U.S. Department of Energy names renters among the people community solar can serve. In the District of Columbia a subscriber is defined as a retail customer of the electric company who owns a subscription and names a billing meter in the District.1
Can I claim the federal solar tax credit for community solar?
Not for an expenditure made in 2026. The residential clean energy credit does not apply to expenditures made after December 31, 2025, and an expenditure is made when installation is completed.10 A business that owns a community solar project may qualify for its own credit under §48E, subject to that section's deadlines.
Related guides
Sources
- D.C. Code §34-1518 Net metering; community renewable energy facilities.
(4) If electricity generated by the customer-generator and fed back into the electric grid exceeds the electricity supplied by the electricity supplier, the customer generator may receive compensation based on the net metering rules established by the Commission. ... shall follow all procedures for …
Checked November 16, 2026. code.dccouncil.gov - 220 CMR 18.04 Calculation of Net Metering Credits (via Cornell LII).
each Distribution Company shall calculate for each Billing Period a Net Metering Credit equal to: (a) 100% of the net excess kilowatt-hours, by time of use, if applicable, multiplied by the sum of the following Distribution Company charges ...: 1. basic service kilowatt-hour charge ... 2. …
Checked November 16, 2026. law.cornell.edu - Massachusetts Electric Co./Nantucket Electric Co. – Net Metering Provision, M.D.P.U. No. 1625 (cancels No. 1598), M.D.P.U. No. 1625, issued Jan 15, 2026, effective March 1, 2026; D.P.U. 23-140-B (cap-exempt transition).
Nameplate Cap Exempt Facility means a Class I Net Metering Facility that is an eligible Renewable Energy Generating Facility pursuant to M.G.L. c. 164 § 138 ... and has a nameplate capacity rating equal to or less than 25 kilowatts AC. … The Standard Net Metering Credit shall be calculated for each …
Checked November 16, 2026. nationalgridus.com - 35-A M.R.S. §3209-A Net energy billing (Maine Revisor, data extracted 10/05/2026).
taking into account accumulated unused kilowatt‑hour credits from the previous billing period. ... 2-A. Billing term length. An amendment, revision or reissuance of a net energy billing agreement made after June 1, 2025 may not include a delivery period end date that is later than the end date …
Checked November 16, 2026. legislature.maine.gov - PG&E Electric Schedule NBT – Net Billing Tariff (NBT) Service, Cal. P.U.C. Sheets 55440-E et seq.; Advice 6848-E (eff. 2023-03-01), Advice 7174-E (eff. 2024-02-15); CPUC D.22-12-056, D.23-11-068.
The NBT schedule may also be referred to as the Solar Billing Plan in customer-facing communications. Residential customers, including Load Aggregation Generating/Aggregated Accounts, taking service on NBT must take service on the E-ELEC (ELECTRIC HOME) rate schedule … For both residential and …
Checked November 16, 2026. pge.com - NYSERDA NY-Sun, "2026 Utility Published Customer Benefit Contribution Rates" (SUN-RSC-cbc-fs-1-v8, 4/26), NY PSC Order Addressing Customer Benefit Contribution Charges (Case 15-E-0751); utility statements filed with DPS.
Utility 2026 Final Residential CBC Rate $/kW-mo. ... Central Hudson $1.67 ... Con Edison $1.29 ... LIPA $1.13 ... National Grid $0.97 ... NYSEG $1.19 ... Orange & Rockland $1.00 ... RG&E $1.31 … Residential and small commercial customers who interconnect solar PV at their site on or after January …
Checked November 16, 2026. nyserda.ny.gov - NYSERDA, VDER Frequently Asked Questions, NYSERDA FAQ.
VDER Phase One does not permit the payout of credits at any time including at the end of a project’s annual period. Annual carryover of credits under VDER Phase One is permitted until the end of the project’s Phase One compensation term of 20 years for Phase One NEM and 25 years for Phase One Value Stack.
Checked November 16, 2026. nyserda.ny.gov - Energy Information Administration, Form EIA-861 Annual Electric Power Industry Report, 2025 final data, Net_Metering_2025.xlsx (f8612025.zip), released October 7, 2026. eia.gov
- 220 CMR 18.07 Net Metering Capacity (via Cornell LII).
(a) Net Metering facilities that are not Net Metering Facilities of a Municipality or Other Governmental Entity does not exceed 7% of the Distribution Company's highest historical peak load; and (b) Net Metering Facilities of a Municipality or Other Governmental Entity does not exceed 8%
Checked November 16, 2026. law.cornell.edu - 26 U.S.C. §25D, Residential clean energy credit, Text current through Public Law 119-142 (November 10, 2026).
in the case of property placed in service after December 31, 2021, 30 percent … The credit allowed under this section shall not apply with respect to any expenditures made after December 31, 2025. … an expenditure with respect to an item shall be treated as made when the original installation of …
Checked November 16, 2026. uscode.house.gov - Public Law 119-21 (July 4, 2025), sections 70506 and 70513, 139 Stat. 72.
Section 25D(h) is amended by striking ``to property placed in service after December 31, 2034'' and inserting ``with respect to any expenditures made after December 31, 2025'' … shall apply to facilities the construction of which begins after the date which is 12 months after the date of enactment of this Act
Checked November 16, 2026. govinfo.gov - 26 U.S.C. §48E, Clean electricity investment credit, Text current through Public Law 119-142 (November 10, 2026).
with a maximum net output of less than 1 megawatt (as measured in alternating current) … This section shall not apply to any qualified property placed in service by the taxpayer after December 31, 2027, which is part of an applicable facility. … This paragraph shall not apply with respect to any …
Checked November 16, 2026. uscode.house.gov - Residential Clean Energy Credit, Page last reviewed or updated July 4, 2026.
utility payments for clean energy you sell back to the grid, such as net metering credits, don … landlord or other property owner who doesn
Checked November 16, 2026. irs.gov
Rules are quoted from the official text and dated; how we check them: methodology. Not legal or tax advice. Found an error? Write to [email protected]; corrections are listed on the updates page.